Volvo V90 - Page 370

DRIVER SUPPORT
* Option/accessory.
368
Limitations of BLIS
The BLIS
76
function may have limitations in cer-
tain situations.
Keep the surface indicated clean – on both the left and
right-hand sides of the car
77
.
Examples of limitations:
•
Dirt, ice and snow covering the sensors may
reduce the functions and deactivate alerts.
•
The BLIS function is automatically deacti-
vated if a trailer, bicycle rack or similar is con-
nected to the car's electrical system.
•
For optimal performance of BLIS, no bicycle
rack, luggage carrier or similar should be
mounted on the car's towbar.
WARNING
•
BLIS does not work on sharp bends.
•
BLIS does not work when the car is
reversing.
Related information
•
BLIS* (p. 366)
Recommended maintenance for
BLIS
•
To ensure optimal functionality, the surfaces
in front of the sensors must be kept clean.
•
Do not affix any objects, tape or labels in the
area of the sensors.
Keep the surface indicated clean – on both the left and
right-hand sides of the car
78
.
The sensors for BLIS are located inside each
corner of the rear wing/bumper. The sensors are
also used by the Cross Traffic Alert (CTA) and
Rear Collision Warning functions.
76
Blind Spot Information
77
NOTE: The illustration is schematic - details may vary depending on car model.
78
NOTE: The illustration is schematic - details may vary depending on car model.