||
STARTING AND DRIVING
482
Conditions for the function
For the function to work requires that a number
of conditions are met:
•
A destination is set in the navigation system
and the driving distance to the destination is
longer than the range possible only on elec-
tric drive.
•
Hybrid drive mode is selected.
•
The
Hold and Charge functions are deacti-
vated.
•
The hybrid battery is charged.
Tips for use
If the car is used for commuting to work and it is
not possible to charge the car at the place of
work, specify the place of work as an intermedi-
ate destination and your home as the final desti-
nation. The discharging of the hybrid battery will
then take place over your runs both to and from
work.
Add similar commuting routes, i.e. the route
between two charging points, as
Favourites in
the navigation system to facilitate arrival.
Related information
•
Drive modes (p. 477)
•
Economical driving (p. 485)
To Next Page
Loading...
