Tuning the Radio 27
Scan
During a Scan, the radio searches for the
next station, pauses on it for a few seconds,
and then searches again for the next station.
To scan while in any tuner mode (AM,
FM or WX) press and hold the UP/DOWN
rocker button to search for the next higher or
lower station on the current band. The radio
displays
SCAN and the audio mutes. The radio
searches for and stops on the next station
with a strong signal and the audio returns to
the original volume. After 5 seconds, the
audio mutes again and the radio continues the
scan. To stop the scan, press the UP/DOWN
rocker button.
If no station is found in 2 passes through
the band, the scan will stop at the starting
frequency.
RDS (Radio Data System Features)
RDS transmits additional information
encoded on an FM stations regular signal.
The RDS feature works only with FM
broadcast stations transmitting this encoded
information. RDS broadcast is widely
available in Europe, but less common in
North America.
RDS features include:
•
Alternate Frequency switching
•
Traffic Program announcements
•
Program Type selections
•
Radio Text
To Next Page
Loading...
Need help?
General
