Vonets VAP11AC - Router Mode Configuration; Change Device Mode

VONETS - Wireless Module/Finished Product
9
5. Reboot device, jump to “System Settings”---- “Reboot Device”, click “Reboot”, when it
is finished, all revised options will take effort.
Remark 2: When VONETS module/WiFi product connect to external network, its IP address will be
changed. At this time, when log in configured page, we suggest you enter configured domain name:
http://vonets.cfg. Or in Windows command window, enter the command: ping vonets.cfg, to get
the IP address of the device, then log in configuration page by this IP address.
Chapter 3 Router Mode Configuration Instruction
3.1 Change device mode
1. Power on VONETS module/WiFi product by 5V/2A power supply, then connect to PC, there are
two connection ways as below:
A. Computer is wired connected to LAN port of VONETS module/WiFi product;