Vonets VAP11AC - Set Wifi Hotspot Parameters

VONETS - Wireless Module/Finished Product
15
4. Click “Reboot”, VONETS module/WiFi product will connect to the configured WiFi hotspot
automatically, if connection is successful, the WiFi LED light will flash quickly;(Please refer to
Remark 1 for the description of the LED light.)
Remark 3: After VONETS module/WiFi product sets the WAN port to access the WiFi hotspot in the
routing mode, its LAN port IP is still 192.168.254.254, and the terminal device also obtains the IP
address of the same network segment, can login configuration page by 192.168.254.254 or
http://vonets.cfg.
3.3 Set WiFi hotspot parameters
1. Revise WiFi name: Jump to “WiFi Repeater”---- “Basic Settings”, enter new WiFi name in
“WiFi Repeater (SSID)”, click “Apply”;