17
WWW.VORONDESIGN.COM
A/B DRIVE MOTORS
The picture shows the A
Drive motor (left hand side of
the printer). B Drive motor is
assembled in the same fashion
with the pulley orientation
ipped.
GRUB SCREWS
aka the root of all issues
Use thread locker on all grub
screws.
Loose grub screws account for
the majority of issues that our
users report. Save yourself hours
of troubleshooting and apply
thread locker to all grub screws
during the build.
See the products application
notes for instructions.
A DRIVE MOTOR
GT2 20T Pulley
To Next Page
Loading...
