VORON STEALTHBURNER - Part Markings and Preparation; Identifying Parts and Hotend Types

37
WWW.VORONDESIGN.COM
IDENTIFYING PRINTED PARTS
The hotend type is embossed on the printed parts.
Make sure they match your hotend.
AVAILABLE MOUNTS
We also provide mounts for other hotends. They are assembled in a similar manner.
For a full list of available mounts and their identication code, see the readme le included in the toolheads folder.
PART MARKINGS
MISSING CORNER? CW1? CW2?
We also provide tool cartridge parts for
ClockWork1, and other extruders designed
as an alternative to CW1. They are identical
except for an opening in the highlighted
corner to help with wire routing for those
designs.