5
WWW.VORONDESIGN.COM
HOW TO GET HELP
If you need assistance with your build, we’re here to help. Head on over to our Discord group and post
your questions. This is our primary medium to help VORON Users and we have a great community that
can help you out if you get stuck.
https://discord.gg/voron
PRIMARY COLOUR
Example z_joint_lower_x4.stl
These les will have nothing at
the start of the lename.
ACCENT COLOUR
Example [a]_tensioner_left.stl
We have added “[a]” to the front
of any STL le that is intended to
be printed with accent color. The
parts are marked with a heart in
the manual.
QUANTITY REQUIRED
Example [a]_z_belt_clip_lower_x4.stl
If any le ends with “_x#”, that is telling
you the quantity of that part required to
build the machine.
FILE NAMING
By this time you should have already downloaded our STL les from the Voron GitHub. You might have noticed that we have
used a unique naming convention for the les. This is how to use them.
INTRODUCTION
CLEAR/TRANSPARENT
Example [c]_led_diffuser.stl
We have added “[c]” to the front
of any STL le that is intended
to be printed with clear or
transparent lament (cloudy is
better than clear; white or light
grey may also work in a pinch).
OPAQUE
Example [o]_led_diffuser_mask.stl
We have added “[o]” to the front
of any STL le that is intended
to be printed with an opaque
lament (blocks light, dark
colours and blacks).
To Next Page
Loading...
