69
WWW.VORONDESIGN.COM
ADXL345 Prototype Board
M2x10 Self Tapping Screws
ISOLATION SPACERS
Most ADXL345 prototype boards have circuit tracks close to
the mounting holes.
Make sure to install spacers to prevent damage to the board.
We included printable spacers in the release
ADXL345 MOUNT
ADXL MOUNT AND INPUT SHAPER CALIBRATION
The ADXL is intended to be mounted only when doing
vibration testing/input shaper calibration and should not be left
on the tool head during normal printing.
To Next Page
Loading...
