13
WWW.VORONDESIGN.COM
FRAME
BUILD ON A FLAT SURFACE
Build the frame on a glass or granite surface
to ensure you can get it as square as possible.
UPSIDE DOWN ASSEMBLY
For ease of assembly we often recommend to
assemble components upside down.
Assemble on a at surface to ensure that the
base is square.
BLIND JOINT ACCESS HOLES
Use the access holes to fasten the bolts.
https://voron.link/onjwmcd
FIRST BLIND JOINT
This design relies on blind joints to
assemble the frame. We outlined the
basics of blind joints on page 8.
If you’ve never assembled one before
we recommend you watch the linked
guide.
To Next Page
Loading...
