VORON SWITCHWIRE - Bearings and Inserts; Mounting Hardware

7
WWW.VORONDESIGN.COM
HARDWARE
HEAT SET INSERT
Heat inserts with a soldering tip so that
they melt the plastic when installed.
As the plastic cools, it solidies around
the knurls and ridges on the insert for
excellent resistance to both torque and
pull-out.
F695 BEARING
A ball bearing with a ange used in
various gantry locations.
POST INSTALL T-SLOT NUT
Nut that can be inserted into the slot of
an aluminium prole. Used in
both M3 and M5 variants throughout this
guide.
SELF TAPPING SCREW
Fastener with a pronounced thread
prole that is screwed directly into
plastic.