6 7
™
BASIC OPERATION
Battery Installation & Replacement
To insert a new battery, flip up the
finger tab on the Battery Cap and
unscrew, counterclockwise, to remove.
Insert a CR123 battery with the
positive side (+) facing outwards.
Reinstall the Battery Cap and ensure
it is tightly closed.
Power Up
Once the battery is installed, the
Anarch
™
is in ready condition –
the normal power-off condition
when not ranging. To power up
the Anarch
™
from the ready
condition, press and release the
“Measure” button. The ranging
screen will display.
Note: The Anarch
™
will auto-shutoff after 10 seconds if no buttons
are pressed. While in the menu, the Anarch
™
will return to the
ranging screen after 30 seconds if no buttons are pressed.
Battery Cap
Battery Cap
Battery
Compartment
Diopter Focus
Ocular Lens
Green LED
Slope
Indicators
Objective
Lens
Cart Magnet
Measure Button
To Next Page
Loading...
Need help?
General
