12
RANGING
With the Fury
®
HD 5000 AB powered up,
position the reticle on the target object and
press and release the “Measure” button to
get the distance measurement. If the laser is
not able to range due to the reflectivity of the
target, you will see a display similar to that
shown here. To range a new target, simply re-
aim and press the “Measure” button again.
Scan Ranging
Activate Scan Ranging by pressing and holding the “Measure”
button. Keeping the button depressed will continuously measure
distance as you pan back and forth across target objects. The
aiming circle will blink as you pan. Releasing the “Measure” button
will return laser to the Power Up Condition.
Scan back and forth, watching for yardage number to display or change.
No Range Returned
To Next Page
Loading...
