10 Preparation
2 Preparation
You can easily store the Tabletop vacuum cleaner in the charging unit, which
can be either mounted on the wall or stand on the table. This means that the
Tabletop vacuum cleaner is ready for use at any time with its powerful recharge-
able batteries.
2.1 Charging the Tabletop vacuum cleaner
The Tabletop vacuum cleaner must be charged before using it for
the fi rst time
If the batteries are empty, the function indicator starts to fl ash and the safety
system (cut-off / automatic stop) switches the Tabletop vacuum cleaner off to
prevent damage to the batteries. The function indicator then fl ashes for a few
more seconds.
There are two options to charge your Tabletop vacuum cleaner:
1. At the charging unit
2. Without the charging unit, by directly connecting the charging cable
to the Tabletop vacuum cleaner. To this end, the charging unit must be
opened fi rst.
2.1.1 Charging at the charging unit
• Ensure that the Tabletop vacuum cleaner is switched off.
• Connect the mains charger to the mains supply.
• Place the Tabletop vacuum cleaner on the charging unit .
Fig. 2.1 Positioning of the charging unit
Fig. 2.2 Placing the charging unit
4
To Next Page
Loading...
Need help?
General
