Vorwerk KOBOLD - User Manual

Questions and Answers

K
Kathryn FletcherJul 27, 2025
How to fix Vorwerk Vacuum Cleaner Kobold VC100 not working?
- M
  Matthew MullenJul 28, 2025
  If your Vorwerk Vacuum Cleaner Kobold VC100 is not working, here are a few things to check: * **Batteries:** They might be empty, so try recharging the vacuum. * **Charging Connection:** Ensure the mains charger is correctly connected to both the vacuum and a working mains socket. A pulsating function indicator on the handle shows it's charging. * **Contact Points:** Soiled contact points can prevent charging. Clean them with a dry cloth. * **Switched On During Charge:** Make sure the vacuum is switched off while it's charging.
W
Willie PowellAug 2, 2025
What to do if Vorwerk KOBOLD doesn't vacuum well and makes noise?
- D
  David CruzAug 3, 2025
  If your Vorwerk Vacuum Cleaner isn't vacuuming well or is making strange noises: * A blocked nozzle could be the culprit. Switch off the vacuum and unblock the nozzle. * The dust chamber may not be correctly inserted. Ensure it's properly inserted. * A full dust chamber can reduce suction. Empty the dust chamber.
A
Alyssa MorrisAug 7, 2025
Why Vorwerk KOBOLD does not start charging?
- D
  Diane MorrisAug 7, 2025
  If the charging process doesn't start when you connect your Vorwerk Vacuum Cleaner to the charging unit (no pulsating function indicator), ensure that the mains charger with charging unit and the handheld vacuum cleaner are connected and that the mains socket works and also ensure that the handheld vacuum cleaner is switched off for recharging.
K
Katie ParksAug 13, 2025
What to do if Vorwerk KOBOLD leaks dust?
- J
  James CampbellAug 14, 2025
  If dust is leaking from your Vorwerk Vacuum Cleaner: * Check that the dust chamber is correctly inserted into the device. * Make sure the filter unit is correctly inserted in the dust chamber.
K
kellieperezAug 19, 2025
Why Vorwerk KOBOLD Vacuum Cleaner function indicator flashes quickly?
- L
  Laurie TownsendAug 19, 2025
  If the function indicator on your Vorwerk Vacuum Cleaner is flashing quickly, it might be in safety mode due to the battery overheating. Disconnect the mains charger from the mains socket and let the vacuum cool down.