Vorwerk VC100 Kobold - User Manual

Questions and Answers

K
Kimberly MorenoAug 2, 2025
How to fix Vorwerk Vacuum Cleaner not working?
- S
  Shannon SosaAug 2, 2025
  If your Vorwerk Vacuum Cleaner isn't working, several factors could be the cause. First, the batteries might be empty, so try recharging it. Ensure the mains charger and charging unit are correctly connected to a working mains socket; the function indicator should pulsate during charging. Also, check the contact points on both the device and charger for any dirt, and clean them with a dry cloth if necessary. Finally, make sure the vacuum cleaner is switched off while it's recharging.
A
Andre LucasAug 8, 2025
Why is my Vorwerk Vacuum Cleaner not vacuuming properly?
- R
  Roger WestAug 8, 2025
  If your Vorwerk Vacuum Cleaner isn't vacuuming well or is making strange noises, it could be due to a few reasons. The nozzle might be blocked, so switch off the cleaner and unblock it. Also, the dust chamber might not be correctly inserted; make sure it is properly in place. Another possibility is that the dust chamber is full, so try emptying it.
A
Anna MooreAug 14, 2025
What to do if Vorwerk Vacuum Cleaner is not charging?
- A
  Aaron SmithAug 14, 2025
  If your Vorwerk Vacuum Cleaner isn't charging (no pulsating light), ensure that the mains charger and charging unit are correctly connected and the mains socket is working. The function indicator on the handle should pulsate while charging. Also, ensure the vacuum cleaner is switched off while recharging.
C
Curtis LewisAug 20, 2025
Why is my Vorwerk Vacuum Cleaner leaking dust?
- J
  Jean WatsonAug 20, 2025
  If dust is leaking from your Vorwerk Vacuum Cleaner, it could be due to the dust chamber not being correctly inserted. Ensure it's properly in place. Alternatively, the filter unit might not be correctly inserted in the dust chamber; double-check its placement.
D
deborahperezAug 27, 2025
What does it mean when Vorwerk Vacuum Cleaner function indicator flashes quickly?
- S
  Sharon MedinaAug 27, 2025
  If the function indicator on your Vorwerk Vacuum Cleaner is flashing quickly, it means the device is in safety mode, possibly because the battery is too hot. Disconnect the mains charger from the mains socket and allow the vacuum cleaner to cool down. If the problem continues, contact Vorwerk's customer service.