Vox Valvetronix ToneLab SE User Manual

18
ACTIVATING OR DEACTIVATING THE KEY LOCK FUNCTION
Here’s how you can use the Key Lock function to disable ToneLabSE’s buttons,
selectors, and knobs so they can’t be accidentally changed during a live perfor-
mance.
NOTE: While the Key Lock function is activated, you won’t be able to operate any
controls except for the switches, pedals and the EXIT button.
NOTE:
The Key Lock setting is cancelled when you turn off the power; it will
be disabled when you turn on the power once again.
ACTIVATING THE KEY LOCK FUNCTION
1. If the name display shows anything other than a program name, or if the char-
acters of the program name are blinking, press the EXIT button.
2. With the program name shown in the name display, press and hold the EXIT
button for at least one second.
The name display will indicate KEY LOCK for one second, and then the value
knob LEDs will go dark.
DEACTIVATING THE KEY LOCK FUNCTION
1. If the name display shows anything other than a program name, press the
EXIT button.
2. Press and hold the EXIT button for at least one second.
The name display will indicate LOCK OFF for one second, and then the value
knob LEDs will light.

Vox Valvetronix ToneLab SE Specifications

General

Brand	Vox
Model	Valvetronix ToneLab SE
Category	Recording Equipment
Language	English