TunerPedals
MIDI/DIGITAL
Factory
settings
Trouble-
shooting
Spec.Program
List
51
Tuner (Bypass, Mute)
For your convenience, ToneLabSE contains an automatic chromatic tuner. The fre-
quency of the middle “A” reference pitch can be adjusted (calibrated) over a range
of 438 Hz–445 Hz.
TUNING PROCEDURE
1. Press and hold the FX ON/OFF (TUNER) button for
about 0.5 seconds. All effects will be bypassed, and
the Auto Chromatic Tuner will operate. (The name dis-
play indicates BYPASS.)
If you are playing a live performance and want to tune
without being heard by the audience, select Silent
Tuning mode as follows before you tune your guitar.
When you press and hold the FX ON/OFF (TUNER)
button for about 1.5 seconds, you will be in Silent Tun-
ing mode, letting you tune your guitar with the output
muted. (The name display indicates MUTE.)
2. When you play a string on your guitar, the nearest pitch will appear in the bank
display, and a meter will appear in the tuner display (3.8).
The note names are displayed as follows.
3. Watch the meter, and tune your guitar.
4. When you’re finished tuning, press the FX ON/OFF (TUNER) button once
again to return to the mode you were in.
HINT: If you’ve started up the tuner from Program Select mode, pressing a pro-
gram select pedal will cancel the tuner and change the program at the same time.
Pitch is flat
Pitch is sharp!
Correct tuning
Note name#Meter
CC#DD#EFF#GG#A A#B
To Next Page
Loading...
Need help?
General
