EasyManuals Logo

Vox Valvetronix ToneLab SE User Manual

Vox Valvetronix ToneLab SE
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
AMP TYPECABINET
TYPE
PEDAL
MODULATION
DELAYREVERB Amp/Effect
47
6. STEREO DELAY (ST DL) STEREO IN/STEREO OUT 1
This is Korg’s 24-bit digital delay, the DL8000R. With the exception of the sampling
frequency and wave control of the DELAY TIME, the circuit is essentially identical.
Since this is a full-stereo design, it’s particularly effective to place it after the output
of a stereo MOD or REVERB effect.
7. CROSS DELAY (CROSS DL) STEREO IN/STEREO OUT 3
This is the DL8000R with settings to make the feedback cross over from L->R and
R->L.
8. 2TAP DELAY (2TAP DLY) MONO IN/STEREO OUT 1
This is the DL8000R with two delay taps whose DELAY TIME is skewed by 20 ms
and separately assigned to L and R, turning a mono input into stereo.
9. RHYTHM DELAY (RHYTM DL) MONO IN/MONO OUT 1
This provides a DL8000R function in which the TIME of two delay taps is automat-
ically set according to the RHYTHM you specify.
[1] “TIME” 26–2000 [ms] * Sets the delay time.
[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.
[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay sound.
[5] “SENS” 0.0–10.0 * Adjusts the sensitivity at which the effect
responds to the volume of your guitar.
[6] “MIX” 0.0–10.0 * Adjusts the mix amount of the delay sound.
[1] “TIME” 1–4000 [ms] Sets the delay time.
[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.
[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay sound.
[4] “DUCKING” 0.0–10.0 * Adjusts the sensitivity at which the effect will
“duck” (decrease) in response to the volume of
your guitar.
Ducking: This automatically lowers the volume of
the delay sound when you play your guitar loudly,
allowing your playing to come through.
[6] “MIX” 0.0–10.0 * Adjusts the mix amount of the delay sound.
[1] “TIME” 1–4000 [ms] Sets the delay time.
[2] “FEEDBACK” 0.0–10.0 * Adjusts the amount of feedback.
[3] “TONE” 1.0–10.0 * Adjusts the tone of the delay sound.
[4] “DUCKING” 0.0–10.0 * Adjusts the sensitivity at which the effect will
“duck” (decrease) in response to the volume of
your guitar.
[5] “RHYTHM” 1, 2, ...11 Specifies the two-tap rhythm delay when the
delay time is set to quarter-note timing. For some
settings, only one tap is used.
[6] “MIX” 0.0–10.0 * Adjusts the mix amount of the delay sound.

Table of Contents

Other manuals for Vox Valvetronix ToneLab SE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vox Valvetronix ToneLab SE and is the answer not in the manual?

Vox Valvetronix ToneLab SE Specifications

General IconGeneral
BrandVox
ModelValvetronix ToneLab SE
CategoryRecording Equipment
LanguageEnglish

Related product manuals