PROGRAM NAME:
PROGRAM NOTES:
NOISE REDUCTION (NR): TAP TEMPO: POWER SELECTION Switch Setting:
PROGRAM NAME:
PROGRAM NOTES:
NOISE REDUCTION (NR): TAP TEMPO: POWER SELECTION Switch Setting:
PROGRAM NAME:
PROGRAM NOTES:
NOISE REDUCTION (NR): TAP TEMPO: POWER SELECTION Switch Setting:
PROGRAM NAME:
PROGRAM NOTES:
NOISE REDUCTION (NR): TAP TEMPO: POWER SELECTION Switch Setting:
1. Indicate where all the knobs are set by drawing a line in the empty circles.
2. Indicate which MODULATION, DELAY & REVERB effects are being used by colouring in the relevant
LED (including EX CON)
3. Don’t forget to make notes on NR, TAP TEMPO and POWER SELECTION in the areas indicated!
Wanna remember how you set up your favourite programs? Well this is the place to do it! Simply do as follows:
WORD TO THE WISE: There’s only four panels you can fill out here so do yourself a favor by
photocopying it and then keep a blank master so you can make more copies whenever you like
To Next Page
Loading...
Need help?
General