Voxelab Aquila S2 User Manual

3D Printer User Manual
Aquila S2
V1.1.2-20211202
Note: Each printer is tested before leaving factory. It is normal if there are some
residues in extruder or some tiny scratches on the build plate. It won’t affect the
printing quality.
3D打印机使用说明书
注：每台 3D 打印机在出厂前都经过打印测试，若设备喷头内存在耗材残留或打印平台有
轻微划痕，都属正常现象，不影响使用。

Voxelab Aquila S2 Specifications

General

Brand	Voxelab
Model	Aquila S2
Category	3D Printers
Language	English

Summary

Notes

Safety Precautions

General safety guidelines and warnings for operating the 3D printer to prevent injury or damage.

Equipment Parameters

Assembly Guide

Install Z-axis Profiles

Install Z-axis Motor Kit and T-shaped Screw Rod

Install Z-axis Left Passive Block

Install Synchronous Belt, Extruder Kit, and Z-axis Right Passive Block

Install X-axis Tensioner

Install X-axis Moving Kit and Adjust Tensioners

Install Gantry Profile and Screen Kit

Install Spool Holder and Profile Cover

Wire Connection

Connecting Printer Wires

Detailed instructions and diagram for connecting various cables to the printer's ports.

Level

Build Plate Leveling Procedure

Steps to perform initial build plate leveling, including UI navigation and adjustments.

Leveling Adjustment and Troubleshooting

Detailed guidance on adjusting the build plate level, including common issues and solutions.

Preheat

Load the filament

Loading and Unloading Filament

Start printing

Preparing for First Print

Ensuring the build plate is leveled, filament is loaded, and cleaning the nozzle before starting.

Starting and Monitoring Prints

Interface guide for selecting files, starting prints, and adjusting settings like Z-offset.

Printing Notice

Important Printing Tips

Trouble shooting

Common Troubleshooting Issues

Solutions for common problems like firmware upgrades, model warping, and screen issues.

Advanced Troubleshooting

Addressing more complex issues such as unreadable files, printer malfunctions, and print quality problems.