Voxelab Proxima 6.0 User Manual

本手册仅适用于Voxelab比邻星 6.0 3D打印机
This guide is only applicable to Voxelab Proxima 6.0 3D printer
快速启动指南
Proxima 6.0 / 比邻星 6.0
Quick Start Guide
V2.0 20210205
1.
2.
3.
4.
5.
当使用光敏树脂溶液时，请戴上手套，避免与皮肤直接接触.
除必要情况下，打印时请勿打开遮光罩，以免外界光照影响打印效果。
未用完的光敏树脂溶液需放置在避光环境，保持环境阴凉通风。
模型在打印完成后可用无水酒精进行清理。
操作时请确保平台安装正确，无异物，以避免损伤LCD屏幕。
注意事项
Please put on gloves while using photopolymer resin to avoid
direct contact with the skin.
To ensure the printing quality, please don’t open the light shield
unless it’s necessary.
Unused photopolymer resin needs to be stored in a dark, dry,
and cool place.
Please clean the finished model with anhydrous alcohol.
Please install the build plate correctly, without dust and items,
to avoid damage to the LCD screen.
1.
2.
3.
4.
5.
WARNING
中文P17

Voxelab Proxima 6.0 Specifications

General

Connectivity	USB
Build Volume	130 x 82 x 155 mm
Light Source	405nm UV LED
LCD Screen	6.08" 2K Monochrome LCD
Print Speed	Up to 60 mm/h
Slicer Software	VoxelPrint

Summary

Foreword

Notice

Work Environment Safety

Guidelines for maintaining a safe and tidy work environment for printer operation.

Place Requirements

Specifications for the physical placement and spacing of the 3D printer.

Electricity Safety

Important safety precautions related to the device's electrical connections and usage.

Personal Safety

Essential safety measures for the operator to follow during printer use.

Cautions

General warnings and precautions to avoid potential issues or damage.

Environment Requirements

Specifies optimal temperature and humidity levels for printer operation.

Photopolymer Resin Storage

Instructions for storing unused photopolymer resin safely and effectively.

Photopolymer Resin Requirements

Guidance on using compatible and appropriate photopolymer resins.

Notes on model layout

Tips for optimizing model placement and orientation for better prints.

Legal Notice

Disclaimer regarding modifications, liability, and document updates.

Getting to Know Your Proxima 6.0

Parameter

Accessory Box

Leveling

First Print

Postprocessing

Replace the FEP film in the resin box

Software Operation

CHITUBOX

Instructions for using the CHITUBOX software for slicing and preparing models.

Load printed files

Maintenence