Voxelab Proxima User Manual

This guide is only applicable to Voxelab Proxima 3D printer
Proxima
Quick Start Guide
VL02-EN/CN-A01
Please put on gloves while using photopolymer resin to avoid
direct contact with hands.
To ensure the printing quality, please don’t open the light shield
unless it’s necessary.
Unused photopolymer resin needs to be stored in a dark, dry ,
and cool place.
Please clean the finished model with anhydrous alcohol.
Please ensure that the platform is installed correctly and no
items before operating to avoid damaging the LCD screen.
1.
2.
3.
4.
5.
WARNING

Voxelab Proxima Specifications

General

Connectivity	USB
Supported Materials	405nm UV Resin
Layer Resolution	0.01 - 0.1 mm
Z-axis Resolution	0.01 mm
Light Source	UV LED
Slicer Software	VoxelPrint
Power Supply	100-240V, 50/60Hz
XY Resolution	0.05 mm (50 microns)

Summary

Quick Start Guide

Safety Warnings

Instructions to ensure safe operation and handling of the 3D printer and resin.

Foreword

Foreword Introduction

Introduction and thank you message from Voxelab Technology, detailing the guide's purpose.

Notice

Work Environment Safety

Guidelines for safe operating environment, including tidiness and accessibility.

Place Requirements

Specifications for printer placement, including ventilation and spacing.

Electricity Safety

Precautions for safe electrical connections and usage, including grounding and storm conditions.

Personal Safety

Mandatory safety measures for users, including protective gear and avoiding hazardous conditions.

Cautions

General warnings and restrictions on printer usage, modifications, and material handling.

Environment Requirements

Optimal temperature and moisture levels for printer operation and resin storage.

Photopolymer Resin Storage

Guidelines for storing unused photopolymer resin safely and effectively.

Photopolymer Resin Requirements

Rules for using Voxelab-approved photopolymer resin for optimal results.

Notes on model layout

Tips for arranging models to improve print quality and reduce exposure time.

Legal Notice

Statement regarding document amendments and copyright information.

Software Operation

CHITUBOX

Detailed steps for using the CHITUBOX software for slicing and preparing models.

Settings

Configuration of print parameters such as layer height, exposure time, and lift speed.

Load printed files

Maintenence

Procedures for cleaning and maintaining the 3D printer and its components.