Environment Requirements
Temperature: RT 15-30℃
Moisture: 20%-70%
Photopolymer Resin Requirements
Do not abuse the photopolymer resin. Please make sure you use the Voxelab
photopolymer resin or the photopolymer resin from the brands accepted by
Voxelab.
Photopolymer Resin Storage
Unused photopolymer resin needs to be stored in a dark, dry, cool place, and out
of the reach of children. The resin stored at low temperature should be shaken
well and used at room temperature (above 20℃).
Notes on model layout
Try to avoid inverted loopholes of model layout. Reduce exposure time when
printing models with dense layout.
Legal Notice
All the information in this document is subject to any amendment or change
without the official authorization from Voxelab.
First edition（April 2020）
@Copyright 2020 Zhejiang Flashforge 3D Technology Co., Ltd. All rights reserved
3
To Next Page
Loading...
