Voxelab Proxima - Settings

4.Click [Settings] and open the pop-up window. Generally, adjust ‘Layer Height,
Bottom Layer Count, Exposure Time, Bottom Exposure Time’
5.Finish all parameter setting, click [Slice] and there is a tip in the down right of the
window shows“Slicing...”. After slicing, there is a pre-review window.
6.Click [Save] ， choose the file type as”.fdg” and stored place and click [Save] .
Settings
Default
Proxima
Machine
Layer Height：
Bottom Layer Count：
Exposure Time：
Bottom Exposure Time：
Light-off Delay：
Bottom Light-off Delay：
mm
s
s
s
s
mm
mm
mm/min
mm/min
mm/min
5
5
60
60
180
0.05
6
2.5
20
0
0
Bottom Lift Distance：
Lifting Distance：
Bottom Lift Speed：
Lifting Speed：
Retract Speed：
Resin Print Infill Gcode Advanced
Save
Network Sending
Machine：Proxima
Resin：normal
Volume：1.8 (ml)
Weight：2.0 (g)
Price：0.05$
Time：2h50m17s
Back
CHITUBOX V1.0 untitled*
15