“KEY” means file recorded by pressing controller
“GSR” means file recorded by triggering G-sensor
“170809” means date 9th August, 2017
“163256” means time 16 o’ clock 32 minutes 56 seconds
“F” means front camera video file
“MOV” means video file format
“KEY” and “GSR” file won’t be overwritten in normal loop recording.
6.4 Wi-Fi Connection & Operation
When successfully connected with your smartphone via built-in Wi-Fi, you can save and
playback the driving recording videos on your smartphone. You can also change settings of
dash cam via Wi-Fi app.
1) Scan the QR code below to download the App from Google Play and App Store.
2) Select ‘MotoDV_M2' from available Wi-Fi network to connect. Default password
is ’1234567890’.
3) Wi-Fi app operation
The dash cam will stop recording when you open Wi-Fi App (connected successfully) during
the recording, and if there is no operation within 30 seconds, or 30 seconds after you quit the
app, it will start recording automatically. Also you can also start/stop recording manually on the
Wi-Fi App.
Click to stop recording manually. Click to start recording manually.
Click to take photo.
Click to switch front and rear camera. Click to enter/exit full screen view.
Click to go back to previous menu.
To Next Page
Loading...
