VTech 18150 TWIN

42
CHANGE A ONE-TO-ONE BROADCAsT CALL
TO AN INTERCOM CALL
You can convert a one-to-one OTB session to an
intercom call.
When your device shows Press and hold [OTB]
to talk, press
INT.. The screen shows Switch to
Intercom?
Press
SELECT. Your device displays
Calling VTECH X. The destination device briey
shows Broadcast Ended and then
VTECH X is calling. The destination handset rings.
Press
TALK/RECALL on the destination handset to
answer the intercom call. Both handsets now show
Intercom.
To end the intercom call, press
OFF/CANCEL on your
handset or place the handset in the charger. Both
screens show Intercom ended.
ANswER AN INCOMING CALL DURING A
BROADCAsT CALL
When you receive an outside call during a OTB, there is
an alert tone.
To answer an incoming call:
During a one-to-one broadcast call, press
TALK/RECALL on the initiating or destination
handset. The broadcast call ends automatically and
the outside call is answered.
1.
2.
3.
4.
•