28
Telephone operation
Options while on calls
Hold
Use this feature to hold one line while accessing another, or as part of the
conference.
While on a call, press HOLD. The corresponding line
key (LINE 1-LINE 4) indicator for the line on hold
flashes slowly. After the call has been put on hold for
more than three minutes, you hear a double beep
every 30 seconds. (To adjust the volume or turn off
the reminder beep, see Hold reminder on page 22).
If you are using the speakerphone, the speakerphone turns off and the
SPEAKER key turns off automatically after you press HOLD. If you are
using the corded headset, the headset turns off and the HEADSET key turns
off automatically after you press HOLD.
To release the hold, press line key (LINE 1-LINE 4) of the line being put
on hold.
Music on hold (M.O.H) feature is available. When you put a call on hold, the
caller will hear the music that comes with the telephone system. To change the
setting and for more details, refer to the Music on hold section in the user’s
manual of CM18445/AM18447 console.
NOTES:
• The call privacy setting in Deskset setup menu remains unchanged after the call is put on hold.
• The call ends automatically after it is put on hold for 15 minutes.
Switching between lines
Use this feature to switch between lines during an outside call:
1. Press the desired line key (LINE 1-LINE 4) of another telephone line to
make or answer another call. The current call is put on hold automatically.
2. To return to the first call, press the line key (LINE 1-LINE 4) of the original
call. The second line is put on hold automatically.
NOTE: Source of music files: FreeMusicArchive.org. Used under open license.
To Next Page
Loading...
Need help?
General