10
2.4 Parent Unit Battery Installation
You can power up the parent unit by connecting it to AC power or to the
rechargeable battery provided. Even if the parent unit is connected to
AC power, we recommend you also install the battery. This guarantees
continual operation in case of a power outage.
Install the battery as shown below:
Press down on the large tab of the battery compartment cover and
pull it out.
Insert the small tabs of the battery into the slots inside the battery
compartment. Make sure the metallic contact is correctly oriented as
shown below. Push the battery into the battery compartment until it
clicks securely into place.
1.
2.
To Next Page
Loading...
