VTech BM4500-OWL - Unpair Baby Unit

38
To pair a new baby unit:
Press when the parent unit is not in use.
Press or to choose Pair/Unpair CAM, then press .
Press again to select Pair CAM.
Press or to choose an empty baby unit slot, then press .
The parent unit screen displays Press and hold the pair button at
the CAM for 5 seconds until the power indicator flashes..
Immediately press and hold PAIR on the bottom of the new baby
unit with a narrow pointed object such as a pencil. The LED light on
the new baby unit flashes quickly.
When pairing is successful, the screen displays Pairing completed.
You hear a confirmation tone. The LED light on the new baby unit turns
green. The parent unit returns to the previous menu.
Notes
If pairing fails, the screen displays Pairing failed. Try the pairing process again.
During registration, you may press to cancel the registration when parent unit
screen displays Pairing... Please Wait....
Only one baby unit can be paired at a time.
6.11.2 Unpair Baby Unit
Make sure you power on the baby unit and the parent unit before
unpairing the baby unit.
To unpair a baby unit:
Press when the parent unit is not in use.
Press or to choose Pair/Unpair CAM, then press .
Press or to choose Unpair CAM, then press .
Press or to choose a desired baby unit or all baby units, then
press .
Press on the parent unit when the screen displays To unpair
CAM X, press the [ZOOM] key at the Parent Unit..
When the screen displays Then, press the [MENU/SELECT] key
to confirm, press .
When unpairing is successful, the screen displays Unpairing
completed. The LED light on the selected baby unit flashes slowly.
Then, the parent unit returns to the previous menu.
1.
2.
3.
4.
5.
•
•
•
1.
2.
3.
4.
5.
6.