VTech BM4500-OWL - 6 USING Your Baby Monitor; Parent Unit Settings; Alert Tone; Low Battery Tone Alert

31
USING YOUR BABY MONITOR
6.1 Parent Unit Settings
To enter the parent unit menu:
Press when the parent unit is not in use.
Press or until the desired category is highlighted on the left
side. Press to enter that feature menu.to enter that feature menu.
Press or until the desired feature is highlighted on the right side.
Press or until the setting option is chosen. Press to
confirm your selection.
Note
To return to the previous menu, press /BACK.
6.2 Alert Tone
6.2.1 Low Battery Tone Alert
You can set whether the parent unit beeps whenever the
parent unit or the baby unit operates in low battery condition.
The low battery tone alert is preset to On.
To set the low battery tone alert:
Press when the parent unit is not in use.
Press or to choose Alert Tone, then press .
Press or choose Low Battery Tone.
Press or to choose On or Off, then press to confirm your
selection.
6.2.2 No Link Alert
You can set whether the parent unit beeps whenever the link between
the parent unit and the baby unit is lost. The no link alert is preset to On.
To set the no link alert of the parent unit:
Press when the parent unit is not in use.
Press or to choose Alert Tone, then press .
Press or to choose No Link Alert.
Press or to choose On or Off, then press to confirm your
selection.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.
6. USING YOUR BABY MONITOR