24
3.6 Parent Unit Display Messages
No link to CAM #
(# represents the
selected baby unit
number)
The baby unit is out of range or is turned off.
Battery low at
Parent Unit
The battery level of the parent unit is very
low and needs to be recharged.
Temperature too
low at CAM # (#
represents the selected
baby unit number)
The temperature detected from the selected
baby unit is below the selected minimum
temperature.
Temperature too
high at CAM # (#
represents the selected
baby unit number)
The temperature detected from the selected
baby unit is above the selected maximum
temperature.
Powering on...
The parent unit is turning on.
The parent unit is searching for baby unit.
To Next Page
Loading...
