To Next Page

To Previous Page

Getting started

Add and register a deskset

You can add CM18245/AM18247 desksets to the CM18445/AM18447 console

at any time, each new deskset must be registered with the console before use.

The desksets are assigned with available extension numbers starting from 1

in ascending order (1 to 9). You can register a maximum of nine devices to the

console.

To register the deskset to the CM18445/AM18447

console:

Start registration when the deskset shows

1) Press MENU on Console ->Registration ->Register

Ext. and 2) Press # on this extension to register.

alternately.

1. On the console, press MENU/SELECT.

2. Press or to scroll to Registration, then press

MENU/SELECT or /SKIP.

3. Press MENU/SELECT or /SKIP to choose Register

ext. The console shows Registering....

4. On the deskset, press #. The deskset shows

Registering....

5. You hear a beep sound when the registration

process is successful. The deskset shows Deskset

X registered. (X represents the extension number,

ranged from 1 to 9). It takes up to 60 seconds to

complete the registration process.

6. Lift the handset. If you hear a dial tone, the registration

was successful.

NOTE: If the registration is not successful, the deskset returns to the

previous screen. Try the registration process again.

VTech CM18245 User Manual

Other manuals for VTech CM18245