25
The deskset comes programmed to select a line automatically for calls when
you do not press a line key. To override the automatic line selection setting, see
Primary line on page 21 for details. When you answer a call, the deskset
automatically selects the ringing line.
Line indicators
Each of the four indicators on LINE 1-LINE 4 indicate the
state of the corresponding telephone line.
• On when the corresponding line is in use.
• Flashes slowly when the line is on hold.
• Flashes quickly when there is an incoming call or
a transfer call.
Making and ending a call
To make a call from the deskset:
1. Lift the handset or press SPEAKER .
-OR-
To override automatic line selection, press LINE 1-LINE 4 for the desired line,
then lift the handset.
2. Wait for a dial tone, then enter the telephone number. The screen displays the
elapsed time as you talk (in hours, minutes and seconds).
To end a call from the deskset:
• Place the handset on the deskset to hang up.
-OR-
• If you are using the speakerphone, press SPEAKER to hang up.
NOTE: The elapsed time is not affected by accessing services from your telephone service provider.
To make a call using a corded headset:
Make sure a corded headset is connected to the deskset (page 9).
1. Press HEADSET on the deskset.
2. Wait for a dial tone, then dial the number.
3. To hang up, press HEADSET.
Telephone operation
Telephone operation
To Next Page
Loading...
Need help?
General
