18
19
Install | Set up Operate Configure | Settings
Set date and time
After you install your telephone or
power returns following a power outage
and battery depletion, the handset will
prompt you to set the date and time.
NOTE
• Make sure you set the date and
time including the year correctly;
otherwise the answering system does
not announce the correct day of the
week for your recorded messages
time stamp.
1. Use the dialing keys (0-9) to enter the
month (MM), date (DD) and year (YY).
Then press SELECT.
2. Use the dialing keys (0-9) to enter the
hour (HH) and minute (MM). Then
press ▼ or ▲ to choose AM or PM.
3. Press SELECT to save.
After the setting for the date and time,
the screen will display Voice guide to...
and set up Ans sys? alternatively.
Set up Answering
System through Voice
Guide
Initial set up
This feature assists you to do the basic
setup of the answering system. You can
follow the voice guide to record your
own announcement, set the number of
rings and the message alert tone.
4. Press SELECT to start the voice guide
for the answering system setup.
You hear the voice prompt “Hello!
This voice guide will assist you with
the basic setup of your answering
system.”
5. Setup your answering system by
inputting the designated numbers as
instructed in the voice guide.
Alternate way to set up
This feature is an alternative way for you
to do the basic setup of the answering
system. You can follow the voice guide
to record your own announcement, set
the number of rings and the message
alert tone.
1. Press MENU when the phone is not
in use.
2. Press ▼ or ▲ to scroll to Answering
sys, and then press SELECT.
3. Press ▼ or ▲ to scroll to Voice guide,
the press SELECT. You hear the voice
prompt “Hello! This voice guide will
assist you with the basic setup of your
answering system.”
4. Set up your answering system by
inputting designated numbers as
instructed in the voice guide.
Mount the telephone
base (optional)
B
A
B
B
A
A
B
B
A
A
a
b
c
d
To Next Page
Loading...
Need help?
General
