5
The following are some of the telephone features you may wish to set.
Refer to Telephone settings in the online user’s manual for detailed
instructions on setting all telephone features.
Ringer volume
You can adjust the ringer volume level, or turn the ringer off.
Press MENU/SELECT when the handset is not in use.
Scroll to >RINGERS, then press MENU/SELECT.
Press MENU/SELECT to select >RINGER VOLUME.
Press or to sample each volume level.
Press MENU/SELECT to save.
If the handset ringer volume is set to off, that handset is silenced for all
incoming calls except paging tone.
The ringer volume also determines the ringer volume of the intercom
calls and the volume of the paging tone.
Set date and time
If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call.
To set the date and time manually:
Press MENU/SELECT when the handset is not in use.
Scroll to select >SETTINGS, then press MENU/SELECT.
Scroll to select >SET DATE/TIME, then press MENU/SELECT.
Use the dialing keys (0-9) to enter the month, date and year.
Press MENU/SELECT to advance to set the time.
Use the dialing keys (0-9) to enter the hour and minute.
Press or to choose AM or PM, or press 2 for AM or 7 for PM. Press
MENU/SELECT to save.
Voicemail indicators
If you subscribe to voicemail service offered by your telephone service
provider, NEW VOICEMAIL and appear on the handset when you have
new voicemail messages. Contact your telephone service provider for
more information and assistance about using your voicemail service. Refer
to Clear voicemail indicators in the online user’s manual on how to clear
the voicemail indicators.
Telephone operation
Make a call
Press /FLASH or , and then dial the telephone
number.
-OR-
Predial by rst dialing the telephone number and
then press /FLASH or .
Answer a call
Press /FLASH, or any dialing key (0-9, TONE or #).
End a call
Press OFF/CANCEL or put the handset to the telephone base or charger.
Speakerphone
During a call, press to switch between speakerphone and normal
handset use.
Volume
During a call, press /VOLUME or /VOLUME to adjust the
listening volume.
The handset earpiece volume setting and speakerphone volume setting
are independent.
Mute
The mute function allows you to hear the other party but the other party
cannot hear you.
During a call, press MUTE/DELETE. The screen displays MUTED for a few
seconds and then MUTE appears until the mute function is turned off.
Press MUTE/DELETE again to resume the conversation. The screen
temporarily displays MICROPHONE ON.
1.
2.
3.
4.
5.
•
•
1.
2.
3.
4.
5.
6.
•
•
•
•
•
•
1.
2.
To Next Page
Need help?
Transmit Frequency
Memory
