7
Join a call in progress
You can use up to two system handsets at a time on an outside call. You
can buy additional expansion handsets (CS6409) for this telephone base.
You can register up to ve handsets to the telephone base.
When a handset is on a call, press /FLASH or on another handset to
join the call.
Press OFF/CANCEL to exit the call. The call continues until all handsets
hang up.
Intercom
Use the intercom features for conversations between two handsets.
Press INT on your handset when it is not in use. When you have
three or more handsets, use the dialing keys to enter a destination
handset number.
To answer the intercom call, press /FLASH, , INT or any dialing key
(0-9, TONE , #) on the destination handset.
To end an intercom call, press OFF/CANCEL or place the handset back
in the telephone base or charger.
Answer an incoming call during an intercom call
If you receive an outside call during an intercom call, there is an alert tone.
To answer the outside call, press /FLASH. The intercom call
ends automatically.
To end the intercom call without answering the outside call, press
OFF/CANCEL. The intercom call ends and the telephone continues
to ring.
Call transfer using intercom
Use the intercom feature to transfer an outside call to another system handset.
During a call, press INT. When you have three or more handsets, use
the dialing keys to enter a destination handset number.
To answer the intercom call, press /FLASH, , INT or any dialing key
(0-9, TONE , #) on the destination handset. The outside call is still on
hold and both handsets now show INTERCOM. You can now have a
private conversation with the destination handset.
From this intercom call, you have the following options:
You can let the destination handset join you on the outside call in a
three-way conversation. Press and hold INT on the original handset.
You can transfer the call. Press OFF/CANCEL, or place your handset
back in the telephone base or charger. Your handset screen shows
CALL TRANSFERRED. The destination handset then automatically
connects to the outside call.
You can press INT to switch between the outside call (OUTSIDE
CALL displays) and the intercom call (INTERCOM displays).
The destination handset can end the intercom call by pressing
OFF/CANCEL, or by placing the handset back in the telephone base or
charger. The outside call continues with the original system handset.
Directory
The directory can store up to 50 entries and are shared by all
system handsets.
To add a directory entry:
Press MENU/SELECT twice.
Scroll to >ADD CONTACT, then press MENU/SELECT. When the screen
displays ENTER NUMBER:
Use the dialing keys to enter the number (up to 30 digits).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE and
then press , or REDIAL/PAUSE repeatedly to select a number.
Press MENU/SELECT to copy the number.
Press MENU/SELECT to move to the name.
When the screen displays ENTER NAME, use the dialing keys to enter
the name (up to 15 characters). Additional key presses show other
characters of that particular key.
Press MENU/SELECT to store the entry.
While entering names and numbers, you can:
Press MUTE/DELETE to backspace and erase a digit or character.
Press and hold MUTE/DELETE to erase the entire entry.
Press and hold REDIAL/PAUSE to insert a dialing pause (for entering
phone numbers only).
Press or to move the cursor to the left or right.
Press 0 to add a space (for entering names only).
•
•
1.
2.
3.
•
•
1.
2.
3.
•
•
•
•
1.
2.
•
•
3.
4.
5.
•
•
•
•
•
To Next Page
Loading...
Need help?
Transmit Frequency
Memory
