Telephone settings
Dial mode
The dial mode is preset to touch-tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse dialing
before using the telephone to make a call.
Press MENU when the handset/telephone base is not in use.
Press or to scroll to Settings, then press SELECT.
Press or to select Dial mode.
Press or to select Touch-tone or Pulse.
Press SELECT to save your selection and return to the previous
menu. You hear a confirmation tone.
Quiet mode
You can turn on quiet mode for a period of time (1-12 hours). During this period,
all tones (except paging tone) and call screening are muted.
When you turn on the quiet mode, the answering system turns on automatically.
When the quiet mode duration expires, the answering system remains on.
To set and turn the quiet mode on:
Press and hold QUIET# when the handset/telephone base
is not in use. The screen shows Quiet: _ _ hours (1-12).
Use the dialing keys to enter the desired duration (1-12),
then press SELECT. All screens display Quiet mode on
and . The /ANS ON/OFF light on the telephone base
turns on.
To turn the quiet mode off:
While the quiet mode is on, press and hold QUIET#. The
screen displays Quiet mode off briey and then returns to idle.
When you change the settings of the ringer tone or ringer volume,
you can still hear the samples even if the quiet mode is on.
1.
2.
3.
4.
5.
1.
2.
•
Touch-tone
ECO
Dial mode
ECO
11:59
AM
2/17
[1-12]
Quiet: _ _ hours
ECO
To Next Page
Loading...
Need help?
General
