Telephone operation
23
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to tone dialing
temporarily during a call. This is useful if you need to send touch-tone signals to
access your telephone banking or long distance services.
During a call, press TONE .
Use the dialing keys to enter the number you wish to dial. The telephone sends
touch-tone signals. It automatically returns to pulse dialing mode after you end the call.
Check voicemail
Press and hold 1 to dial your voicemail number.
To set your voicemail number, see Voicemail number on
page 15.
Chain dialing
Use this feature on the cordless handsets to initiate a dialing sequence from numbers
stored in the directory, caller ID log or redial list while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID log or redial list.
To access a number from the directory while on a call:
Press MENU.
Press SELECT to choose Directory.
Press or to scroll to the desired entry.
Press SELECT to dial the displayed number.
To access a number from the caller ID log while on a call:
Press MENU.
Press or to scroll to Caller ID log, then press SELECT.
Press or to scroll to the desired entry.
Press SELECT to dial the displayed number.
To access a number from the redial list while on a call:
Press REDIAL to enter the redial list.
Press , or REDIAL repeatedly to browse to the desired entry.
Press SELECT to dial the displayed number.
Press CANCEL to exit the directory, caller ID log or redial list while on a call.
1.
2.
•
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
800-595-9511
Mike Smith
ECO
Directory
ECO
To Next Page
Loading...
Need help?
General
