VTech CS6648-2 User Manual

38
Directory
Speed dial
You can copy up to nine directory entries into the speed dial locations (0 and 2-9) so
that you can dial these numbers more quickly.
The speed dial memory locations are stored at the telephone base and are shared
by all system devices. Changes made to the speed dial entries on one system device
apply to all.
Assign a speed dial number
1. Press MENU when the phone is not in use.
2. Press or to scroll toto scroll to Directory, then press SELECT.
3. Press or to scroll toto scroll to Speed dial, then press SELECT.
4. Press , or a dialing key (0 or 2-9) to choose the desired speed
dial location.
5. Press SELECT. The screen displays Copy from DIR... and then
the first entry in the directory.
6. Press or to scroll to desired entry.
7. Press SELECT to save your selection and return to the previous
menu. You hear a confirmation tone.
Reassign a speed dial number
1. PressPress MENU when the phone is not in use.
2. Press or to scroll to Directory, then press SELECTSELECT.
3. Press or to scroll to Speed dial, then press SELECT.
4. Press , or a dialing key (0 or 2-9) to choose the speed dial
location you want to reassign.
5. Press SELECT twice. The screen displays Reassign SD.
6. Press SELECT. The screen briefly shows Copy from DIR... then
the first entry of the directory.
7. Press or to scroll to the desired entry.
8. Press SELECT to save your selection and return to the previous
menu. You hear a confirmation tone.
Copy from DIR...
ECO
0:Mike Smith
ECO
Reassign SD
ECO
Copy from DIR...
ECO
Speed dial
ECO
0:<unassigned>
ECO

VTech CS6648-2 Specifications

General

Brand	VTech
Model	CS6648-2
Category	Cordless Telephone
Language	English