EN - 17
English
Call waiting
1. When you hear a call waiting tone during
a call, press FLASH/TALK on the cordless
handset to put the current call on hold
and take the new incoming call.
2. Press FLASH/TALK at any time to switch
back and forth between calls.
Message waiting indicator
When a voice message is received, the
MESSAGE WAITING LED on the cordless
handset flashes.
Play messages
Press MESSAGES in idle mode to play
messages.
Find handset
Use this feature to find all registered cordless
handsets.
To start paging:
Press / FIND HANDSET on the base station
when the phone is not in use. All idle cordless
handsets beep for 60 seconds.
To end paging:
• Press / FIND HANDSET again on the
base station.
-OR-
• Press OFF on the cordless handset.
To Next Page
Loading...
