To end the home line call
Press END CALL/CLEAR on the handset. The mobile line is still on hold. All handsets display Mobile call on hold.
To resume the mobile line call on hold
Press MOBILE on the handset.
Note: If you have turned on your answering system and you do not answer the incoming home line call, the call is answered
by your answering system.
If you make or answer a home line call on a handset, you can transfer the call to your headset. The handset remains active,
but the handset earpiece and microphone are muted. If you hang up the handset, the call will end.
Mobile phone voicemail
If you have voicemail service active on your mobile phone, and you do not answer the incoming mobile line call, the call will be
answered by your mobile mobile phone service provider for more information about voicemail
service.
Call timer
Your handset will automatically time the duration of all external calls. The handset display shows the call duration both during
and for a few seconds after your call is terminated.
Out of range warning
When the handset goes out of range of the base, the line will hang up if you are on a call. When you move back within range, the
handset will automatically reconnect to the base.
Using a Bluetooth headset
You can use a Bluetooth headset on home line calls. However, you will need to stay within 30 feet from the DDA200BT to
maintain the Bluetooth signal.
To answer a home line call using a Bluetooth headset
Press the call key on your headset.
To end a home line call you answered from a Bluetooth headset
Press the call key on your headset.
If you make or answer a home line call on a handset, you can transfer the call to your headset. The handset remains active, but
the handset earpiece and microphone are muted. If you hang up the handset, the call will end.
To transfer a call from a handset to a Bluetooth headset
Press MENU/SELECT twice to select Use headset.
To transfer a call from the headset back to the handset
Press MENU/SELECT twice to select Use handset.
To end a call that started at the handset
Press END CALL/CLEAR or put the handset in the DDA200BT base or charger.
Note: If you answer a call using a headset, and you lose the Bluetooth connection or the battery is depleted, the call will be
lost.
If you are using a headset for a call which is transferred from DDA200BT handset, and you lose the Bluetooth connection or
the battery of the headset is depleted, the call will be transferred back to the originating handset.
Earpiece / hands free volume
Press UP/DOWN to adjust the listening volume of the earpiece or loudspeaker during a call. Each press of the button increases
or decreases the volume level by one increment.
1. Press UP/DOWN to increase or decrease the volume level while on a call.
Note: The handset earpiece volume setting (1-5) and speakerphone volume setting (1-6) are independent. When the volume
reaches the minimum or maximum setting, you will hear two beeps.
To Next Page
Loading...
Need help?
General
