20
Telephone base settings
Ringer volume
You can adjust the ringer volume or turn the ringer off.
To adjust the ringer volume:
Press the MENU softkey when the telephone base is
not in use.
Press /CID or /DIR to select Ringers, then press the
SELECT softkey.
Press the SELECT softkey to select Ringer volume.
Press /CID or /DIR to choose Line 1, Line 2 or
Lines 1&2. Then press the SELECT softkey.
Press /CID or /DIR to adjust the volume. A sample of
each ringer volume plays as you scroll through
the choices. Press the OFF softkey to turn off the
ringer and RINGER VOLUME Ringer muted shows
on the screen.
Press the SET softkey to confirm or press CANCEL to
exit to the previous menu.
Ringer tone
You can select the ringer tone.
To adjust the ringer volume:
Press the MENU softkey when the telephone base is
not in use.
Press /CID or /DIR to select Ringers, then press the
SELECT softkey.
Press /CID or /DIR to select Ringer tone, then
press the SELECT softkey.
Press /CID or /DIR to choose Line 1, Line 2 or
Lines 1&2. Then press the SELECT softkey.
Press /CID or /DIR to select the desired ringer tone.
Press the SET softkey to confirm your selection or
press CANCEL to exit to the previous menu.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
Setting the volume to the lowest level turns off the
ringer. A ringer off icon
,
, or
of the
respective phone line(s) flashes on the screen.
See page 15 to set the handset ringer volume.
•
•
Ringers
In the ringers menu, you can adjust the ringer volume and select the ringer
tone for each telephone line.
Line 1
Line 2
Lines 1&2
SELECT
Ringer volume
Ringer tone
SELECT
RINGER TONE
1
2
SET
Line 1
Line 2
Lines 1&2
SELECT
Ringer volume
Ringer tone
SELECT
SELECT
Intercom
Ringers
Settings
RINGER VOLUME
OFF SET
To Next Page
Loading...
Need help?
General
