27
Answering system settings
Number of rings
You can choose from two, four, or six rings; or toll saver. With toll saver
selected, the answering system answers after two rings when you have new
messages, and after four rings when you have no new messages. This
enables you to check for new messages and avoid paying unnecessary long
distance charges if you are calling from out of your local area.
To change the setting:
Using the telephone base:
Press the MENU softkey when the telephone base is not in use.
Press the SELECT softkey to select Answering sys.
Press /CID or /DIR to select Mailbox 1 or Mailbox
2,
then press the SELECT softkey. The corresponding
icon,
1
or
2, flashes on the screen.
Press /CID or /DIR to select Ans sys setup, then
press the SELECT softkey.
Press /CID or /DIR to select # of rings, then press
the SELECT softkey.
Press /CID or /DIR to select 2, 4, 6, or Toll saver,
then press the SET softkey to confirm your setting or
press CANCEL to exit to the previous menu without
making any changes.
Using the handset:
Press the MENU softkey when the handset is not in use.
Press the SELECT softkey to select ANSWERING SYS.
Press or to select Mailbox 1 or Mailbox 2, then
press the SELECT softkey. The corresponding icon,
1
or
2
, flashes on the screen.
Press or to select Ans sys setup, then press the
SELECT softkey.
Press or to select # of rings, then press the
SELECT softkey.
Press or to select 2, 4, 6, or Toll saver, then press
the SET softkey to confirm your setting or press the
BACK softkey to exit to the previous menu without
making any changes.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
1
BACK
SELECT
ANS SYS SETUP
Announcement
# of rings
Remote code
1
BACK
SET
# OF RINGS
2
4
6
1
Announcement
# of rings
Remote code
SELECT
1
# OF RINGS
2
4
SELECT
To Next Page
Loading...
Need help?
General
