VTech DS6151 - Telephone Operation: Managing Speed Dial Assignments; Reassigning Speed Dial Entries; Deleting Speed Dial Entries

54
Telephone operation
Reassign a speed dial entry
You can reassign a speed dial entry using a handset or the telephone base.
To edit an entry:
Search for the desired entry in the speed dial directory (see Review the
speed dial directory on page 52).
When the desired entry appears, press the REPLACE softkey. The screen
shows the directory listed in chronological order.
Press or on the handset or /CID or /DIR on the telephone base to
browse and select another desired entry, then press the ASSIGN softkey
to confirm your selection.
Press OFF on the handset or CANCEL on the telephone base to exit to
the previous menu.
Delete a speed dial entry
You can delete a speed dial entry using a handset or the telephone base.
Once a speed dial entry is deleted, it cannot be retrieved.
To delete an entry:
Search for the desired entry in the speed dial directory (see Review the
speed dial directory on page 52).
When the desired entry appears, press the DELETE softkey. The screen
then shows the speed dial directory.
1.
2.
3.
4.
1.
2.