46
Telephone operation
Press OFF to exit to the previous menu.
Create a new directory entry (continued)
Using the telephone base:
Press the MENU softkey when the telephone base is
not in use.
Press /CID or /DIR to select DIRECTORY and then
press the SELECT softkey.
Press /CID or /DIR to select Add contact, then
press the SELECT softkey. The screen shows
ENTER NUMBER.
Use the dialing keys (0-9) to enter the number.
Press CANCEL to backspace and erase a digit.
Press and hold CANCEL to return to the idle mode.
Press /CID to move the cursor to the left or /DIR
to the right.
Press the PAUSE softkey to insert a dialing pause
(a p appears).
Press the NEXT softkey to move to the name. The
screen shows ENTER NAME.
Use the dialing keys (see page 47) to enter the name.
Press CANCEL to backspace and erase a character.
Press and hold CANCEL to return to the idle mode.
Press /CID to move the cursor to the left or /DIR to the right.
Press the SAVE softkey to save, then the screen shows the
saved directory.
Press CANCEL to exit to the previous menu.
8.
1.
2.
3.
4.
•
•
•
•
5.
6.
•
•
•
7.
8.
Answering sys
Directory
Call log
SELECT
Review
Add contact
Speed dial
SELECT
ENTER NUMBER
_
PAUSE NEXT
ENTER NAME
_
BACK SAVE
To Next Page
Loading...
Need help?
General
