3
• While reviewing the redial list,
directory, caller ID log or block list,
press to delete an individual entry.
• While entering names or numbers,
press to delete a digit or character.
• While entering names or numbers,
press and hold to delete all digits or
characters.
10 – Microphone
11 – CHARGE light
• On when the handset is charging in
the telephone base.
12 – CELL
• Press to make or answer a cell call.
• During a call, press to answer an
incoming cell call when you receive
a call waiting alert.
13 – HOME / FLASH
• Press to make or answer a home call.
• During a call, press to answer an
incoming home call when you
receive a call waiting alert.
14 –
• Press and hold to set or dial your
voicemail number.
• Press repeatedly to add or remove
1 in front of the caller ID log entry
before dialing or saving it to the
directory.
15 – TONE /
• Press to switch to tone dialing
temporarily during a call if you have
set the dial mode to pulse.
• While entering names, press to
change the next letter to upper or
lower case.
16 –
• Make or answer a call using the
handset speakerphone.
• Switch between the handset
speakerphone and the handset
earpiece during a call.
Telephone base overview
1 – CELL 1 / CELL 2 lights
• On steadily when the telephone
base is paired and connected with a
Bluetooth device.
• Flashes when the telephone base is
in discoverable mode.
• Flashes when there is an incoming
cell call.
2 – CELL 1 / CELL 2
• Press and hold to add or replace a
Bluetooth device.
• Press to re-connect a disconnected
cell device.
3 – FIND HS
• Press to page your handset.
4 – Charging cradle
3 – IN USE light
• On when the telephone line is in use.
• Flashes when there is an incoming
call, or another telephone sharing
the same line is in use.
1
3
2
4
5
To Next Page
Loading...
Need help?
Frequency and Channels
Memory
