VTech DS6321-2 User Manual

20
Bluetooth
Active devices
Only devices on the active devices list can establish a Bluetooth connection
with the telephone base. Although two paired devices can be connected to
the telephone base, only one Bluetooth cell phone or a headset can be on a
call at a time.
Review the active devices list
Press MENU/SELECT on the handset when it is not
in use.
Press or to highlight Bluetooth, then press
MENU/SELECT.
Press or to highlight Active devices, then press
MENU/SELECT.
Connect/Disconnect an active device
While in the active devices menu, you may connect or
disconnect your active device.
Press MENU/SELECT on the handset when it is not
in use.
Press or to highlight Bluetooth, then press
MENU/SELECT.
Press or to highlight Active devices, then press
MENU/SELECT.
Press or to highlight a device when necessary,
then press MENU/SELECT.
Press or to highlight Connect/Disconnect
(whichever is applicable), then press
MENU/SELECT to conrm. The handset displays
Device connected/Device disconnected.
1.
2.
3.
1.
2.
3.
4.
5.
When your active device is connected, you will be prompted to select
Disconnect. When your active device is disconnected, you will be prompted
to select Connect.
When adding, removing, or replacing a Bluetooth device on the
active devices list, all connected devices will be temporarily disconnected until
the procedure is complete. It may take up to two minutes to reconnect.
Ans. system
Directory
Call log
Intercom
Bluetooth
SELECT DEVICE
1 Headset A
2 Cell Phone AC
Disconnect
Remove active
BLUETOOTH
Download dir
Add cellular
Add headset
Active devices

VTech DS6321-2 Specifications

General

Brand	VTech
Model	DS6321-2
Category	Cordless Telephone
Language	English