VTech DS6321-2

45
Telephone operation
Hold
You can place a home or cell call on hold. You will hear an alert tone if you
have not taken the call off of hold after 14 minutes. You will hear another
alert tone 30 seconds later. At 15 minutes on hold, the call on hold
automatically disconnects.
To place a home call on hold:
Press HOLD. Home call on hold appears and /HOME/FLASH ashes.
To resume a home call on hold:
Press /HOME/FLASH .
To place a cell call on hold:
Press HOLD. Cell call on hold appears and /CELL ashes.
To resume a cell call on hold:
Press /CELL.
Handset locator
This feature helps you nd a misplaced handset.
To start paging:
Press /FIND HANDSET on the telephone base
when it is not in use. All idle handsets ring and
display
**
Paging
**
.
To end paging:
Press /FIND HANDSET on the telephone base.
- OR -
Press /HOME/FLASH, or any dialing keys (0-9, #, TONE ) on
the handset.
•
•
•
•
•
•
•