VTech DS6321-2

46
Telephone operation
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, call log or redial while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as
bank account numbers or access codes) from the directory, call log or
redial list.
To access a number in the directory while on a call:
Press MENU/SELECT.
Press or to highlight Directory, then press MENU/SELECT.
Press MENU/SELECT to select Home directory.
Press or to scroll to the desired entry or perform an alphabetical
search (page 55).
Press MENU/SELECT to dial the displayed number.
To access a number in the call log while on a call:
Press MENU/SELECT.
Press or to highlight Call log, then press MENU/SELECT.
Press or to scroll to the desired entry.
Press MENU/SELECT to dial the displayed number.
To access the redial list while on a call:
Press REDIAL/PAUSE.
Press , or REDIAL/PAUSE until the desired number displays, then
press MENU/SELECT. If you do not press MENU/SELECT within two
seconds, the number displayed will be dialed automatically.
1.
2.
3.
4.
5.
1.
2.
3.
4.
1.
2.
You cannot edit a directory entry while on a call. For more details about the
directory, see page 52.
You cannot copy a call log entry into the directory while on a call. For more
details about call log, see page 59.
You can only view the numbers in the directory, call log or redial while on a
call and cannot erase any entries.
Press and hold OFF/CLEAR to exit redial, directory or call log while on a call.
•
•
•
•